Pixhawk PX4 Autopilot PIX 2.4.8 32 Bit Flight Controller
Features:
1. The advanced 32-bit ARM CortexM4 high-performance processors, can run NuttX RTOS real-time operating system;
2. 14 PWM / servo output;
3. Bus interface (UART, I2C, SPI, CAN);
4. The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant power input and failover;
7. Multicolor LED lights;
8. Provide multi-tone buzzer Interface
9. Micro SD recording flight data;
Specifications:
Microprocessor
1.32 2 MB flash STM32F427 Cortex M4, with hardware floating-point processing unit
2. frequency: 168MHZ, 256K RAM
3.32 STM32F103 backup coprocessor
Sensor
1.L3GD20 3-axis digital gyroscope 16
2.LSM303D 3-axis accelerometer 14 / Magnetometer
3.MPU6000 6-axis accelerometer / magnetometer
4.MS5607 precision barometer
Interface
1 .5 high voltage compatible UART 1, 2 with hardware flow control
2. 2 CAN
3.Spektrum DSM / DSM2 / DSM-X satellite receiver compatible input
4.Futaba SBUS compatible inputs and outputs
5.PPM Signal Input
6.RSSI (PWM or voltage) Input
7.I2C
8.SPI
9.3.3 and 6.6VADC input
10. External MICRO USB Interface
If you choose " Base Pixhawk 2.4.8 set " :
Package listing:
1 x Pixhawk 2.4.8 32bit ARM Flight Controller
1 x Safety button and Buzzer
1 x 4G TF card
1 x Shock Absorber
1 x Power module
1 x PPM wth shell
1 x I2C with shell
1 x RGB (There are two kinds of RGB module, send it at random.)
Cables
If you choose " Full Pixhawk 2.4.8 set " :
Package listing:
1 x Pixhawk 2.4.8 32bit ARM Flight Controller
1 x Safety button and Buzzer
1 x 4G TF card
1 x Shock Absorber
1 x Power module
1 x PPM wth shell
1 x I2C with shell
1 x RGB (There are two kinds of RGB module, send it at random.)
1 x Mini OSD
1 x M8N GPS
1 x GPS Holder
1 x 433Mhz / 915Mhz 100mW/500mW Telemetry Kit (Send it as your choice)
Cables