New

5km Wireless AV Transmitter PLUSE TS832 Receiver RC832 48ch

Special Price SDG 13858.70

Item Code: #341

Availability: In stock

Condition: New

Quick Overview

Transmitting/Receiving System Combo Module for FPV  TS832 + RC832

 

THIS IS THE NEW  EDITION OF 5.8G 600mW A/V WIRELESS SYSTEM.

48 channels: Cover A, B, E bands and F band (Airwave band), 4 bands and all frequencies compactable;
Two switching buttons: CH button for frequencies channels switching, FR button for frequencies bands switching;
Two digits display: one for CH and the other for FR, real-time positioning which frequency band and which channel received;
Power off memory: Replay the very last frequency band and channel
Independent video and audio signal outputs

Product Details

FPV 5.8G 600mW A/V Transmitting/Receiving System TS832 48ch + RC832 - 48CH Edition | RP-SMA video format supported: NTSC/PAL
Antenna connection: RP-SMA, jack (module side, both TX and RX)

TX TS832 48ch specs:

Power input: 7.4-16V (3S Lipo suggested)
Transmitting power: 600mA
Antenna gain: 2db
Working current: 220mA at 12V
Video bandwidth: 8M
Audio bandwidth : 6.5M

output : 5V
Weight: 22g
Dimension: 54x 32x 10mm(excluding antenna)

 


The RC832 Receiver is nice and small in size for easy integration into your ground station, but big in quality and features. The receiver uses the same two button interface as the TS832 Transmitter making channel swapping a breeze. There are two independent AV outputs for both audio and video. So you can use a monitor and set of goggles or maybe a DVR to record your flight, for when your significant other asks where you were for the last 4 hours. Powering the receiver at the field is as easy as plugging in a 3 cell lipoly into the included prewired cable with mini JST. It just doesn't get any simpler than this.

For best range and video link stability we recommend using the Boscam 5.8GHz Cloud Spirit circular-polarized Antenna Set (SMA-RP) available below in the accessory's tab

Features:
• 48 channels: Cover A, B, E,F,H bands and L bands
• Two switching buttons for the band and channel
• Two digits display for  the band and channel
• Power off memory for last channel and band
• dual Independent video and audio signal outputs

Specs:
Video format supported: NTSC/PAL
Antenna connection: RP-SMA, jack
Power input: 12V
Working current: 200mA max
Antenna impedance: 50Ω
Antenna gain: 2db
Rx sensitivity -90dBm
Video impedance: 75Ω
Video format: NTSC/PAL auto
Dimension: 80x 65 x15mm
Weight: 85g
 

Frequency range:

FR1: 5865M 5845M 5825M 5805M 5785M 5765M 5745M 5725M

FR2: 5733M 5752M 5771M 5790M 5809M 5828M 5847M 5866M

FR3: 5705M 5685M 5665M 5645M 5885M 5905M 5925M 5945M

FR4: 5740M 5760M 5780M 5800M 5820M 5840M 5860M 5880M

FR5: 5658M 5695M 5732M 5769M 5806M 5843M 5880M 5917M

FR6: 5362M 5399M 5436M 5473M 5510M 5547M 5584M 5621M

 

Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty.

 

Note:  Green color board  TS832  is an upgrated  version, so in use will be more  stable and  better heat dispersion.