note: This OLED display uses SSD1306 driver chip and can be controlled via I2C interface. Although there's a 3.3V LDO (Low Dropout) voltage regulator built in this OLED module, SDA & SCL lines are not protected/level-shifted in any way. Hence we recommend using 3.3V only for this OLED display. Use 5V for supply and logic level at your own risk. Otherwise, you may use any logic level converter on the IO pins for that extra safety.
Specifications:
-
Resolution: 128 x 64 pixels
-
Display Area: 0.96 inch diagonal
- Color Depth:Monochrome Blue-on-Black
-
Emiting Color: Blue
-
View Angle: Min 160 degree
-
Built-in Controller: SSD1306
-
Interface: I2C
-
I2C Address: 0x3C (can be modified to 0x3D)
-
Supply Voltage (Vcc): 3.3V
-
Logic Level (SDA & SCL): 3.3V
- Dimension (Overall Module): 27.7 x 27.2 x 3.8 mm
- Dimension (OLED Panel only): 26.7 x 19.3 x 1.7 mm